Firmware

EXCLUSIVE Update your Galaxy Beam to Android 4.1.2 (By Odin)

Samsung takes their own sweet time to update their mid-range Galaxy devices to Android 4.1.2 but thankfully, we’re here! Today we want to share the last test firmware based on Android 4.1.2 for the Galaxy Beam. There aren’t many interface differences but the device feels like reborn with faster performance and better battery life. We expect Samsung to release the official update around end next month (Samsung started the first test with Android 4.1.2 in March).

Below are a couple of screenshots of Android 4.1.2 for the Galaxy Beam. 

This firmware is an official firmware leak from Samsung given by one of our insiders.

Big thanks to him!

Download the firmware here

Flashing Instructions
– Unzip the file
– Open Odin 3.07 (already included in the firmware package)
– Restart phone in download mode (Press and hold Home + Power + Volume down buttons)
– Connect phone and wait until you get a blue sign in Odin
– Add CODE_I8530XXAMF1_1053499_REV00_user_low_ship.tar to CODE
– Add CSC_OXA_I8530OXAAMF1_1053499_REV00_user_low_ship.tar to CSC
– Add GT-I8530_EUR_XX_8G to PIT
– Make sure re-partition is ticked
– Start flash, sit back and wait a few minutes.
– If you encounter any issues with the firmware (Any FC, Bootloop etc)
– Boot into recovery mode (Home+ Power + Volume Up)
– Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
– Then choose reboot and you should be good to go!

MAKE SURE TO BACK-UP EVERYTHING BEFORE YOU PROCEED!!!

79 Comments

Sign in »

79
Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Nipon26022524
Nipon26022524

thang you

abbasmehdi20
abbasmehdi20

plz sir dwonlod link not working

livefaisal14
livefaisal14

hey guys will this firmware work ???
some1 plzz reply

hussein47
hussein47

Hi sir
Do you suggest me to update my phone Android from 2.3.6 to 4.1.2 for Galaxy Beam GT-I8530

OPANPERANTAU
OPANPERANTAU

KITKAT

romize1688
romize1688

link roto

asistec
asistec

quien me pasa el link para descargar odin x favor

madman_01
madman_01

Downlode problems in sarver

xmen1991
xmen1991

hey the link is not working

djhenryquecabral
djhenryquecabral

PLEASEE !! KITKAT 4.4 for GALAXY BEAM ???

ersinurgup
ersinurgup

Firmware link is not using, because in hot file. Please change another web site.

Yerika
Yerika

Firmware link is not using, because in hot file. Please change another web site.

mostafa aween
mostafa aween

I want to change the user interface into Arabic if you allow for the Galaxy Beam 4.1.2 jelly bean.

mostafa aween
mostafa aween

Hello
Roman 4.1 installed on may Galaxy Peam 18530 I did not find the option of Arabic Language outside help because the Roman good minus Arabic Language tanks

lksmobileservice
lksmobileservice

link not work?

tir666
tir666

Yea… It is 2014 and still no official Jelly Bean update for Galaxy Beam …. btw this leaked version stucks the phone … so still 2.3.6 from 2012 .. I can just congrats to Samsung.

SAMPUTER
SAMPUTER

دەست خۆش بۆ كۆمێنتی كوردییەكەت كاك ئاوارە
بەڵام كێشەی من هۆت فایلە ،باند بووە

Awara
Awara

ده ستان خؤشبيت سه ركه و تو بن ئه رئ هاو ريئيا بؤ كه س به كوردى كؤ مينت نانو سيت

ocang666
ocang666

hotfile is’not working,please another link
thanks

ramrop
ramrop

hotfire link not working
please provide me another link
thanks in advnce

Paps Duke
Paps Duke

I think u can easily solve this issue without flashing anything again i guess…just head to settings–>call,and look for turn on proximity sensor and click it,that should help…..by the i wishing i was the one enjoying this new update,sadly ace plus has no future.reply if it worked !

Biscuitninja
Biscuitninja

Hi has anyone experienced problems with the phone function after this update? When I either make or receive a call the display turns off and I am unable to access the keypad … which means I cannot disconnect the call, mute or punch in additional digits. I tried reflash the firmware, but it did not fix the issue. Any ideas on how to fix? Also I am unable to go back to GB using the original firmware (from sammobile). Please advice!

narong_ckap@hotmail.com

many thanks , my beam is new phone.

yahyayhay
yahyayhay

Are u sure for ticked repartition

Tom932579
Tom932579

I need advice, I can’t find place where I need put that CODE file in odin.
– Add CODE_I8530XXAMF1_1053499_REV00_user_low_ship.tar to CODE
It’s this step. Please help..

eurolmobile
eurolmobile

va en PDA!
abrazo

redamazeka
redamazeka

any one answer me about update for ace plus

Paps Duke
Paps Duke

redamazeka 24 th october and no jb for ace plus,november/december is not for 4.1.2 jelly bean its for 4.3 and profit making…..so the 4.1.2 jb is official done,sorry mini 2,s duos and ace plus users.