Reply With Quoteread the whole procedure twice
1.backup everything you need to pc or memory card
2.charge the battery and make sure you have a tleast 50 % full.
3.type this code in *2767*3855#
Think before you give this code. This code is used for factory format. It'll remove all files and settings including the internal memory storage. It'll also reinstall the phone firmware.
PS: Once you give this code, there is no way to cancel the operation unless you remove the battery from the phone. So think twice before giving this code.
4.Type *#7465625# on your phone and check whether Sim Lock and network lock is off
if the lock is on, then ,i think you are on a contract with your network and find a way to remove it.otherwise dont proceed.(the procedure is available in some forum, dont remember where)
5.so now your Sim Lock and network lock is off.
6.download the bada 1.2 firmware you want on your phone.
download multiloader
im using this custom firmware by
[ Login above or register to see download links. ]
if you need social hub premium (shp) download this file too [ Login above or register to see download links. ]
7.extract every file and keep them in a folder.
if you need shp , replace the original ShpApp.app file with the one you downloaded from 4shared link above.
8.switch off the phone,(there should not be any sim and memory card in the phone), press the volume down button,call end key and lock key simultaneously for some second to enter download mode.
9.connect the phone to pc using usb and open multiloader v5.65 ,tick LSI ,click port search and you should see LISMORE READY against any of the port.
10.tick full download and drag and drop files from the folder( the folder from step 7).now it should look similar to the below picture.the files may be different as the firmware you are using is different from the picture.
[ Login above or register to see download links. ]
11.now check LSI is clicked,full download is clicked,and there are files against every row(boot,amms,apps till shp.app).some firmware may have some files less , you only have to make sure every file in the firmware is loaded in the multiloader.(use the shp.app file in 4shared if you need shp activated)
12.click download.wait till you see the line "all files complete" in multiloader.the phone will restart now automatically.that means the flashing is successful.
13.if you end up with an error in the multiloader after pressing the download, try again by connecting the phone again and making a port search(i usually get an error when i move from 1.2 to 2 or otherwise and no such error in between 1.2 firmwares)
14.repeat step 3 to do a format after flashing.
15.
Originally Posted by xhonteo
[ Login above or 
