Help Needed , Phone not Working

[saurabhthakar]

Hello Friends ,

I need some help.

I want to install JB in my s2.

One of my friend suggest that go to below link & update.

[ Login above or register to see download links. ]


So , I do all step that mentioned. But after some process i get FAIL message in ODIN.

& Now , My mobile also not working.

So , anyone please help me to solve problem.

My mobile info -

Model no - i9100

Androd V - 4.0.3

Base band v - I9100DDLP8

Kernal v - 3.0.15-I9100XXLPQ-CL223505 se.infra@SEP-94#3

Build no- IML74K.XXLPQ

[Sp1tfire]

What exactly isn't working ? Can you turn on your phone ?

If you can go to download mode, get the latest 4.1.2 firmware for S2 from sammobile and flash it with Odin (what you flashed was a leaked firmware). Usually firmwares from sammobile have only one file, not 3 like the walkthrough you used. Put that file in PDA section and flash it. It should work. I hope your phone is GT-I9100 and not GT-I9100G, GT-I9100T or any other variant, cause firmwares might not be compatible.

Make sure you have all the drivers installed, Kies isn't running and also turn off your antivirus while you flash the firmware.

[saurabhthakar]

What exactly isn't working ? Can you turn on your phone ?

If you can go to download mode, get the latest 4.1.2 firmware for S2 from sammobile and flash it with Odin (what you flashed was a leaked firmware). Usually firmwares from sammobile have only one file, not 3 like the walkthrough you used. Put that file in PDA section and flash it. It should work. I hope your phone is GT-I9100 and not GT-I9100G, GT-I9100T or any other variant, cause firmwares might not be compatible.

Nake sure you have all the drivers installed, Kies isn't running and also turn off your antivirus while you flash the firmware.

Thanks for the help.

Can you please provide me the download link that suitable for my s2.

& its i9100.

Thanks

[Sp1tfire]

My personal recommendation would be:

[ Login above or register to see download links. ] or [ Login above or register to see download links. ] .

[saurabhthakar]

can that firmware run on my mobile ? i am from india.

& i also download I9100XWLS8 .

& same problem happening

When i Press start button , some process started , but after some time Message display - FAILED.

[Sp1tfire]

Yeah, those firmwares can run on your mobile. If you try to power on the phone what does it happen ? Stays at Samsung logo (bootloop) ? Is your device locked to a specific network ?

[saurabhthakar]

nop , its not locked.

when i press start button , now screen appears ,

Please reset firmware from kies

[Sp1tfire]

Turn off your phone, go into download mode (volume down + home + power button), open Odin on PC, connect your phone to PC through USB cable, put the file from the firmware you want to flash in PDA section and start flashing the firmware on your phone. If flashing fails means the connection between your pc and phone is not stable. If USB drivers are installed, Kies is not working and antivirus is turned off when flashing, it should work.

[saurabhthakar]

ok , thanks bro ,,

Will check again & reply if any error comes .

Thanks for help.